LT-JJ42 Pull-over door tester

Product Description:

This machine is suitable for testing the durability of hinge for sliding doors and furniture. The finished furniture sliding door with hinges is connected to the instrument, and the sliding door is opened and closed repeatedly in the simulation of the situation in the daily use process. After a certain number of cycles, the hinge is checked to see if there is any damage or other circumstances that affect the use.

Technical parameters

1. Test speed: 0-2m/s

2. Cylinder stroke :800mm

3. Maximum height of beam :1200mm

4. Opening Angle: 90 ~ 120 degrees

5. Counter requirements: 0 ~ 9,999,999 arbitrary setting

6. Motor: Panasonic servo motor

7 volume: about 150*100*160cm(W*D*H)

8. Weight: about 85Kg

9. Air source: more than 7kgf/cm^2 stable air source

10. Power :1∮ AC 220V 50HZ 3A

11. Rotation Angle: 0-90 degrees

12. Sensors: 2

Compliance with standards

In line with QB/T 2189-2013, GB/T 10357.5-2011 standards related requirements.

Product features

1. Can be used in the installed products for testing, can be firmly connected with all kinds of sliding doors and side and should not produce any force affecting the test.

2. The detection of moving parts can control the pull wire speed, and can be adjusted between 0.25m/s-2m/s according to the need.

3. The drawing length and Angle of the test equipment can be adjusted according to the actual testing requirements. The adjustment range is between 100mm-500mm in length and 0-90℃ in Angle.

4. The opening and closing force is measured and displayed by auxiliary instrument. The time pause can be adjusted when the drawer is opened and closed, and the number of testing machines can be set.

5. The machine is beautiful, there should be no moving parts exposed, and easy to operate, while the configuration of drawer and cabinet door switch device.