• Landline +86-0769-81551929
Dongguan Lituo Testing instruments Co., Ltd

Products

LT-JD01-X10 Oven type adhesive tape holding force tester

Keywords :

holding force tester / tester / Tape tester


  • Hits : 242
  • Company : Dongguan Lituo Testing instruments Co., Ltd
  • Telephone : +86 13612738714
Contact Us

Product Details

Contact Us

Five Advantages Of Products

  • Temperature range: normal temperature to 200℃
  • Control mode: microcomputer P.L.D automatic temperature control calculation
  • Temperature display accuracy: 0.1℃ display
  • Temperature control precision: ±0.3℃
  • Distribution accuracy: ±1%(1℃)at ~ Room100 ℃

Product Details

LT-JD01-X10 烘箱型胶带保持力试验机.jpg


LT-JD01-X10 Oven type adhesive tape holding force tester

 

The product description

This product is tested under static load for adhesive force of the tape. It automatically times the time which the tape can keep under certain load and temperature, to confirm the aging of the tape. Cut a 1-inch-wide strip of tape and stick it on the specified SUS#304 stainless steel plate. Roll the 2kg standard roller back and forth at the speed of 300mm per minute for three times, then hang the steel plate on the test machine, add the specified weight. When the tape falls from the steel plate, the timer automatically keeps the test time to evaluate the durability of the tape.

 

Conform to the standard

It conforms to CNS-11887, 11888, PSTC-7 and other standards.

 

Technical parameters

1. Temperature range: normal temperature to 200

2. Control mode: microcomputer P.L.D automatic temperature control calculation

3. Temperature display accuracy: 0.1 display

4. Temperature control precision: ±0.3

5. Distribution accuracy: ±1%(1)at ~ Room100

6. Test fixture: weight 1kg,10

7. Connector (stainless steel plate) : 10 pieces, SUS#304

8. Timer: electronic LCD display, automatic retention time,99999.9 hours (or minutes can be set), a total of 10 groups

9. Safety protection: all specimens fall off, buzzer (attached EGO overtemperature power/safety overload switch), and automatically cut off heat

10. Material: internal -SUS#304 stainless steel plate; Exterior - Premium paint finish

11. Machine size: 90*55*75cm(W*D*H)

12. Machine weight: 80kg

13. Power supply: 1, AC220V/50HZ,12A


Dongguan Lituo Testing instruments Co., Ltd

Contact Person: Vera Liu

Department: Sales

Telephone: +86 13612738714

Landline: +86-0769-81551929

Company Address: No. 117, Longyan 5th Road, Humen Town, Dongguan,Guangdong,China

Factory Address: No.6, Caixing Dong Road, Houjie Town, Dongguan City, Guangdong Province, China.

Website: www.lttestmachine.com

Previous: LT-JD01-10 Ten groups tape holdin...

Next: LT-JD02-90 90-degree peel strengt...

Inquiry :

Inquiry